FAQ

WHAT ARE THE BENEFITS OF BULFAB'S CROSSMEMBERS?

Bulfab Crossmember will improve the overall stiffness of your car's front end while reducing wight. They clean up the engine bay and give you more clearance for radiators, lower intercooler piping and downpipes. Transmission removal and reinstallation will also be greatly simplified.

DIFFERENCE BETWEEN THE 1-PIECE AND 3-PIECE CROSSMEMBERS?

The difference between the two crossmembers is that the 3-piece will provide additional bracing and stiffness but it will be slighly heavier.

DO I WANT POLY OR SOLID ROLLSTOP?

There will be increased vibration with the solid rollstop, but nothing major. Removing your balance shafts is way worse. For those who are concerned about performance, but do not want to sacrifice comfort, we recomment the Energy Suspension Poly rollstop. It is much stiffer than stock, but not as rough as the solid one.

FITMENT AND MOTOR MOUNT BRACKETS

Manual DSMs Front motormount bracket 347, Rear 195. Auto DSMs Front motormount bracket 506, Rear 793. You must have the correct front and rear bracket to ensure proper fitment.

WHAT ARE THE BENEFITS OF BULFAB'S MUSTACHE BAR?

More stiffness in the rear subframe, better 60ft time and less parts breaking. It is also 6lbs lighter than the stock piece and significantly stiffer.

WHAT HARDWARE IS INCLUDED WITH BULFAB'S PRODUCTS?

Bulfab's products include all necessary pieces of hardware (spacers, washers, extended bolts, etc) to perform the install.

WHAT ARE THE BENEFITS OF THE SOLID REAR SUBFRAME BUSHINGS?

Similar to the mustache bar it will offer little to no flex in the rear subframe under a lanuch / hard acceleration, make the car more predictable, improve your 60ft time and help you break less parts.

HOW DO I INSTALL THE SOLID REAR SUBFRAME BUSHINGS?

You will have to press out the factory rubber bushings or burn them out and clean up the subframe first and then install the bushings by pressing them in. Leave the sleeves in!

WHAT EQUIPMENT DOES BULFAB USE?

At Bulfab, we try to use the best material and equipment (HTP TIG Welders, Baileigh Tube Notchers / Saws, JD2 Electric-Hydraulic benders, Femi Bandsaws, Amada Lasers, etc.)

HOW LONG UNTIL MY ORDER IS SHIPPED?

If the part is in stock it will ship the same day, otherwise it will be a max of 2-3 days. We ship everything via UPS.